Methyl Acrylate
Neno wi piny ma jucul
Methyl Acrylate (MA) ubedo piny ma rangi pare epe, ma nyai man ma nguc ma rac. Calu piny ma pire tek ma juyubu ku piny ma kwo man monomer, enyutho tic maber man copolymerization, ma weko ebedo piny ma pire tek ikind tic mapol ma dongo dongo. Methyl acrylate mwa urombo ku cik ma tek mi tic, ku leng man maber, maber pi tic madongo mi tic man tic ku kemikol maber.
Ng'om zoo ungeye, methyl acrylate piretek pi yiku polymers, coatings, adhesives, textiles, man chemical fibers. Ber pa tic pare man tic pare maber uketho edoko piny maber ni ju ma yiku piny ma mitu adwogi maber i yubu piny migi.
Lembe ma pire tek & kite pa kemikol
| Parameter | Lembe ma pire tek |
|---|---|
| Lanyuth | Piny ma nen maleng ma rangi ope |
| Leng (GC) | ≥99.5% |
| Acrylic Acid ma nwang i iye | ≤0.15% |
| Piny ma nwang i pii | ≤0.05% |
| Kabedo mi lyel | 80.0-81.5°C |
| Kabedo mi lyethu℃ | -75°C |
| Pek (°C) | 0.953-0.957 g/cm3 |
| RefractivevIndex(°C) | 1.4010-1.4040 |
| Flash Point (Closed Cup) | -3°C |
Acrylic Acid Methyl Ester Core Advantages
- Leng man tek: Leng ≥ 99.5%, leng ma nok, ma ketho tic maber i polymerization man synthesis processes.
- Reactivity maber: Copolymerizes mayot ku acrylic acid, vinyl acetate, styrene, man monomers mukende, ma weko jucopo loko kit pa polymer.
- Wide Compatibility: Ber pi pii, solvent, man radiation-curable systems, ma rwate ku yeny mi yubu piny matung tung.
- Gwoko piny maber: Lubu cik pa ISO 9001, ku pimo lembe zo nicaku i yero piny ma jutiyo kudu nitundu i cwalo piny ma judaru timo.
- Kero mi kelo piny i ng'om zoo: Yore mi yubu piny maber man dul mi tero piny ma dongo, ma konyo lwongo madwong man cwalo piny i kare ma mitire i ng'om zoo.
Acrylic Acid Methyl Ester Tic madongo
Simenti maber: 0.12–0.24% (pa pek pa cement)
Simenti ma tek/ma juyubu con: 0.3–0.5% (ma poko ngo i 0.5%)
Ber pa yath ma nok: 0.06% yath = 12% dwoko piny pa pii + 23% dongo pa tego (ma kadho jam tic ma rwinyo)
Lembe ma jutimo
1. Coatings Industry
Calu piny ma pire tek ma jutiyo kudu pi yubu filim, methyl acrylate jutiyu kudu lee pi yiku rangi mi gedo ma tiyo ku pii, rangi mi yiku mutukari, rangi mi yiku mutukari, man rangi mi yen. E medo kero pa coatings ni juku koth, mako, loko loko, man ler, man edwoko piny VOC ma wok kud i iye—ma rwate ku kite ma gwoko kwo pa piny i ng'om zoo. Ber pi dhugola mi ot/woko ot, dhumo pa OEM mi mutukari, man dhugola mi pii ma jwigo lyethu.
2. Adhesives & Sealants Industry
Jutiyo kudu pi yubu pressure-sensitive adhesives (PSAs), adhesives mi laminating cam, construction sealants, man hot-melt adhesives. E medo tego pa adhesives, bedo ma tek, man bedo ma tek. Ber pi ketho cam i sanduku (lubo cik mi gwoko leng pa cam), gedo (gwoko piny, mako piny ma pii kadhu kud i iye), man mako piny ma tiyo ku mac.
3. Tic mi plastik man resin
Tiyu calu monomer pi yubu acrylic resins, polyacrylates, man copolymer plastics (e.g., acrylonitrile-butadiene-styrene (ABS) copolymers). Acrylic resins ma juyubu ku MA jutiyu kudu i acrylic products (PMMA), decorative panels, man optical materials. Copolymerization ku plastics mukende medo kero migi mi juku koth, kero migi mi juku dhuny, man leng pa wigi.
4. Tic mi bongo man adila
Yubu piny mi pimo dit pa bongo, piny mi thum, man del. Piny ma jutiyo kudu pi poko bongo medo rwom pa bongo, gwoko bongo ma nyai, man tic maber mi tweyo bongo; piny ma jutiyo kudu pi daru adila medo ler, mayom, man tek pa adila. Ber pi pamba, polyester, man bongo ma judubo, man de adila mandha man adila ma juyubu.
5. Tic mi Kemical Fiber
Jutiyo kudu pi loko jamb kum (e.g., polyester, nylon). Emiyo piny ma jwigo piny, ma jwigo pii, man ma jwigo pii, ma medo tic migi i kendi mi tugu, kendi ma tiyo, man bongo mi tic. Fibers ma juloko nyuthu bedo maber man bedo maber ka juporo ku ma juloko ngo.
6. Tic mange
Jutiyo kudu de pi yiku surfactants, plasticizers, crosslinking agents, man pharmaceutical intermediates. I tic mi poto, etiye piny ma jutiyo kudu pi yath moko ma jutiyo kudu; I electronics, jutiyo kudu i conductive polymers man electronic adhesives.
Kethu piny i bok man gwoko piny
Methyl Propenoate Packaging
- 180 kg galvanized steel drum (i iye ma juketho ku anti-corrosion coating)
- 1000 kg IBC tote (HDPE maber, ku safety valve)
- Cwalo piny madwong (ISO tank container, pi wil madongo)
Kite mi kano piny
• Gwok i ot ma ngic, ma muthwo, ma yamo wok iye maber, mabor ku lero pa ceng man piny ma lyethu (lyeth ≤ 30 °C).
• Bed bor ku oxidants, acids, bases, man peroxides pi gwoko polymerization nyo decomposition.
• Keth cingi maber ingey tic kudu pi jwigo lyethu man pii ma mol; kyewo maleng ku "Flammable Liquid" man "Harmful".
• Kur rwinyo ku piny ma rwate ngo; gwoki woko ku cam man kongo.
• Kwo mi gwoko piny: Dwe abusiel i thenge mi gwoko piny maber.
Methyl Propenoate Safety & Handling
Ponji: Methyl acrylate utiye piny ma wang, nya wang, adila, man yore mi yweyo. Ecopu nyayu adwogi marac ikum dhanu ma remo migi nyai. Lub cik mi gwoko kwo ikare ma itiyo kudu.
Gwok mi mako piny
- Ruk piny mi gwoko kwo peri (PPE): goggles mi kemikol, gloves mi nitrile, anti-static overalls, man respiratory mask (ka itiyo kama yamu ope i iye maber).
- Ti ku kabedu ma yamo wok iye maber; ti ku jam tic pa mac ma copo wango ngo man jam tic moko pi jwigo lyethu.
- Kur mako adila man wang. Ka inwango, lwok pio pio ku pii madwong pi dakika 15 man icidhi ibang daktari ka remo umediri.
- Ka ibe yweyo, cidhi i yamo maleng man iket yore mi yweyo maber; yeny kony pa daktari ka peko mi yweyo wok.
- Ka mac ucaku wang, ti ku buru ma muthwo, carbon dioxide, nyo foam extinguishers; kud iti ku pii kende.
Gwoko kabedu
Kud ibol pii ma cido nyo piny madong i pii, ngom, nyo pii ma rac. Keth piny ne nimakere ku cik mi gwoko kwo pa piny, ber ka itiyo kudu i kabedo mi gwoko piny ma rac.
Wec kudwa
Pi wel, lanyuth, nyo waraga mi TDS/COA, lok kud juwil mwa:
Email: info@anhaochemical.com：
Simu: +86 15169355198
Kabedo mir Internet: https://www.anhaochemical.com/